sine n. 【數學】正弦〔略 sin〕。 sine curve 正弦曲線。 sine wave 正弦波。 〔拉丁語〕 無。 sine die 無限期地,無期;日期不定。 sine prole 【法律】無后嗣[子女]的。 sine qua non 必要條件[資格]。
Returns the hyperbolic sine of the specified angle 返回指定角度的雙曲正弦值。
Calculates the inverse hyperbolic sine of an 的反雙曲正弦值。
Calculates the hyperbolic sine of an 的雙曲正弦值。
The hyperbolic sine of 的雙曲正弦值。
The asinh ( ) function returns the inverse hyperbolic sine of a number 函數的作用是:返回至各指定數值所對應的反雙曲正弦值。
During the temperature fields , the results indicate that the processing parameters such as the extrusion velocity , casting temperature , perform preheating temperature , die preheating temperature and so on are important for the temperature fields besides the dwell time . they are must be in concordance each other to the deforming zone is in the quasi - solid state , and the stable semi - solid extrusion is implemented . during the deforming fields , the hyperbolic sine thermo - rigid - viscoplastic fem model is selected according to the forming feature of the process , and the variations of the stress - strain fields are studied 在溫度場的模擬中,模擬結果表明,保壓時間是影響制件成形質量的關鍵因素之一,擠壓速度、液態金屬澆注溫度、預制體預熱溫度和模具預熱溫度等工藝參數對溫度場的影響也很大,需進行參數之間的協調,只有當變形區內部始終維持準固態時,才能實現穩定的液-固擠壓成形過程;在變形場的模擬中,根據液態浸滲擠壓的成形特征,選用了雙曲正弦剛-粘塑性有限元計算模型,研究了變形過程中應力應變場的變化規律,研究了模角對變形和金屬流動的影響及變形力的變化過程和其影響因素。